Product Description
MAGNUM™ 3416SC LE
ABS Resin
Overview Overview:
MAGNUM™ 3416SC LE is developed as Low odor high-heat MASS ABS for the automotive industry. MAGNUM™
3416SC LE resin pellets as well as the parts made by it have less odor, even in a wide process window. It is
universally suitable for all interior and exterior applications.
Benefits:
· Low odor of the resin pellets and parts made by it
· Lot to lot consistency allowing for optimal machine parameters settings from the start
· Self-coloring enabling improvement of costs by using less pigments and lowering your logistic costs
· Low VOC allowing a better interior air quality facing increasing regulatory and OEMs constraints.
· Heat stability during wide range of processing temperatures: enhanced part design freedom
Applications:
· Main interior and exterior automotive applications
· Mid-consoles
· Door panels
· Door handles
· Pillars
Product Parameters
| Physical |
|
Nominal Value (English) |
Nominal Value (SI) |
Test Method |
| Density |
|
1.05 g/cm³ |
1.05 g/cm³ |
ISO 1183 |
| Apparent (Bulk) Density |
|
0.65 g/cm³ |
0.65 g/cm³ |
ISO 60 |
| Melt Mass-Flow Rate (MFR) |
|
|
|
ISO 1133 |
| 220°C/10.0 kg |
|
6.5 g/10 min |
6.5 g/10 min |
|
| 230°C/3.8 kg |
|
2.3 g/10 min |
2.3 g/10 min |
|
| Molding Shrinkage |
|
4.0E-3 to 7.0E-3 in/in |
0.40 to 0.70 % |
ISO 294-4 |
| Mechanical |
|
Nominal Value (English) |
Nominal Value (SI) |
Test Method |
| Tensile Modulus |
|
305000 psi |
2100 MPa |
ISO 527-1/1 |
| Tensile Stress (Yield) |
|
6240 psi |
43.0 MPa |
ISO 527-2/50 |
| Tensile Strain |
|
|
|
ISO 527-2/50 |
| Yield |
|
3.0 % |
3.0 % |
|
| Break |
|
30 % |
30 % |
|
| Flexural Modulus 1 |
|
305000 psi |
2100 MPa |
ISO 178 |
| Flexural Stress 1 |
|
9720 psi |
67.0 MPa |
ISO 178 |
| Impact |
|
Nominal Value (English) |
Nominal Value (SI) |
Test Method |
| Charpy Notched Impact Strength |
|
|
|
ISO 179/1eA |
| 73°F (23°C), Injection Molded |
|
6.7 ft·lb/in² |
14 kJ/m² |
|
| Thermal |
|
Nominal Value (English) |
Nominal Value (SI) |
Test Method |
| Deflection Temperature Under Load |
|
|
|
ISO 75-2/A |
| 264 psi (1.8 MPa), Unannealed |
|
181 °F |
83.0 °C |
|
| Vicat Softening Temperature |
|
226 °F |
108 °C |
ISO 306/B50 |
| Flammability |
|
Nominal Value (English) |
Nominal Value (SI) |
Test Method |
| Flame Rating 2 |
|
|
|
UL 94 |
| 0.06 in (1.5 mm) |
|
HB |
HB |
|
| 0.12 in (3.0 mm) |
|
HB |
HB |
|
| Carbon Emission 2 |
|
20.0 µg/g |
20.0 µg/g |
VDA 277 |
| Page: 1 of 3 |
|
|
|
Form No. 500-00461736en |
| |
|
|
|
|
| Injection |
Nominal Value (English) |
Nominal Value (SI) |
|
|
| Drying Temperature |
176 to 194 °F |
80 to 90 °C |
|
|
| Drying Time |
2.0 to 4.0 hr |
2.0 to 4.0 hr |
|
|
| Notes |
|
|
|
|
| These are typical properties only and are not to be construed as specifications. Users should confirm results by their own tests. |
|
|
|
|
| 1 0.079 in/min (2.0 mm/min) |
|
|
|
|
| 2 This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
|
|
|
|
| Page: 2 of 3 |
|
|
Form No. 500-00461736en |
|
Applications
Company Profile
Hoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.
Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc.
Packaging & Shipping
FAQ
Q: Where is your company based?
A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.
Q:What can you buy from us?
A: PC, PC/ABS,
Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,. Option A:30% pay in advance, 70% before shipping
Q: What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 5-10 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.
Audited Supplier 
){kind=link}