Customization: | Available |
---|---|
Feature: | Oxidative Degradable |
CAS No.: | 25037-45-0 |
Still deciding? Get samples of US$ 3/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Clarnate® A1107
Property Name | Value | Unit |
---|---|---|
Appearance | Granule | -- |
Physical State | Solid | -- |
Relative density (water = 1) | 1.18-1.20 | -- |
Auto-Ignition Temperature | >550 | °C |
Decomposition Temperature | >380 | -- |
Melting point/freezing point | >240 | °C |
Flash Point | >522 | °C |
Molecular Weight | 516.58 | g/mol |
Solubility in Water | Immiscible | -- |
Specification Name | Value | Unit | Test Method | Test Condition |
---|---|---|---|---|
Melt Flow Index at 300°C/1.2 Kg | 10 | g/10min | ASTM D1238 | -- |
Mold Shrinkage | 0.5 - 0.7 | % | ASTM D955 | -- |
Water Absorption at 23°C, 24h | 0.2 | % | ASTM D570 | -- |
Density | 1.2 | g/cm3 | ASTM D792 | -- |
Stress at Break at 50 mm/min | 70 | MPa | ASTM D638 | -- |
Tensile Modulus at 1 mm/min | 2300 | MPa | -- | -- |
Yield Stress at 50 mm/min | 65 | MPa | -- | -- |
Yield Strain at 50 mm/min | 6 | % | -- | -- |
Strain at Break at 50 mm/min | 120 | % | -- | -- |
Flexural Strength at 2 mm/min | 98 | MPa | ASTM D790 | -- |
Flexural Modulus at 2 mm/min | -- | MPa | -- | -- |
Izod Notched Impact Strength at 23 °C | 780 | J/m | ASTM D256 | -- |
Heat Distortion Temp. at 1.82 MPa; 3.2 mm | 128 | °C | ASTM D648 | -- |
Vicat Softening Temp. at 120 °C/h; 50 N | 149 | °C | ASTM D1525 | -- |
Haze at 3 mm | < 0.8 | % | ASTM D1003 | -- |
Light Transmittance at 3 mm | 89 | % | -- | -- |
Refractive Index | 1.586 | -- | ASTM D542 | -- |
Flame Rating at 3 mm | HB | -- | UL 94 | -- |
Flame Rating at 1.5mm | V2 | -- | -- | -- |
Relative Permittivity at 100 Hz | 3.1 | -- | IEC 60250 | -- |
Relative Permittivity at 1 MHz | 3 | -- | -- | -- |
Dissipation Factor at 100 Hz | 5 | 10^-4 | -- | -- |
Dissipation Factor at 1 MHz | 90 | 10^-4 | -- | -- |
Volume Resistivity | 10^14 | Ω·m | IEC 60093 | -- |
Surface resistivity | 10^16 | Ω | -- | -- |
Electric Strength at 1 mm | 34 | kV/mm | IEC 60243-1 | -- |
Comparative Tracking Index at Solution A | 250 | V | IEC 60112 | -- |
Drying Temperature | -- | °C | -- | -- |
Drying Time | -- | h | -- | -- |
Injection Temperature | 280 - 310 | °C | -- | -- |
Mold temperature | 80 | °C | -- | -- |
Injection Speed | 50 | mm/s | -- | -- |